What is AISI4161?
AISI4161 steel is an AISI/SAE standard alloy steel with chromium molybdenum. This comprehensive guide covers chemical composition, mechanical properties, and machining characteristics per AISI/SAE standards.
Chemical Composition
| Element | Content (%) | Standard |
|---|---|---|
| C | ≤0.15 | ASTM/GB |
| Mn | ≤1.25 | ASTM/GB |
| P | ≤0.06 | ASTM/GB |
| S | ≥0.15 | ASTM/GB |
| Si | ≤1.00 | ASTM/GB |
| Cr | 12.0-14.0 | ASTM/GB |
| Fe | Balance | ASTM/GB |
Mechanical Properties
| Property | Value | Standard |
|---|---|---|
| Tensile Strength | ≥940 MPa | AISI/SAE |
| Yield Strength | ≥760 MPa | AISI/SAE |
| Elongation | ≥5% | AISI/SAE |
| Hardness | 305 HV | HV |
| Density | 7.85 g/cm³ | 20°C |
Key Features
- High strength and toughness
- Good hardenability
- Suitable for heat treatment
- Good machinability in annealed condition
- Widely used in automotive and aerospace
Applications
- Automotive components
- Aerospace parts
- High-strength structural parts
- Gear and shaft components
Machinability
AISI4161 steel has good machinability. Recommended: Carbide tools, cutting speed 80-150 m/min, feed 0.15-0.30 mm/rev.
Why Choose Us?
We specialize in precision alloy steel machining. Contact us for a quote!
