What is 2507 (2507 Super Duplex Stainless Steel)?
2507 Super Duplex Stainless Steel is a high-performance super duplex stainless steel renowned for excellent corrosion resistance, mechanical properties, and versatility. This comprehensive guide covers its chemical composition, mechanical properties, machining characteristics, and industrial applications per ASTM/GB standards.
Chemical Composition (ASTM A240/A276)
| Element | Content (%) | Specification |
|---|---|---|
| Chromium (Cr) | 18-20% | ASTM A240 |
| Nickel (Ni) | 8-12% | ASTM A240 |
| Carbon (C) | ≤0.08% | ASTM A240 |
| Manganese (Mn) | ≤2.0% | ASTM A240 |
| Silicon (Si) | ≤1.0% | ASTM A240 |
Mechanical Properties
| Property | Value | Standard |
|---|---|---|
| Tensile Strength | ≥515 MPa | ASTM A240 |
| Yield Strength (0.2% offset) | ≥205 MPa | ASTM A240 |
| Elongation | ≥40% (in 50mm) | ASTM A240 |
| Hardness | ≤201 HB / ≤92 HRB | ASTM E18 |
| Density | 8.0 g/cm³ | ASTM A484 |
Key Features
- Excellent corrosion resistance: Resistant to atmospheric corrosion, water, and many chemicals
- Good mechanical properties: High strength and ductility for various applications
- Easy to fabricate: Excellent formability and weldability
- Hygienic surface: Easy to clean, ideal for food and medical applications
- Heat resistant: Good oxidation resistance up to 800°C
- Cryogenic tough: Maintains toughness at low temperatures
Common Applications
- Kitchen equipment: Sinks, cookware, cutlery, food processing equipment
- Medical devices: Surgical instruments, implant trays, hospital equipment
- Architecture: Handrails, facades, elevator panels, decorative trim
- Chemical processing: Tanks, pipes, valves, heat exchangers
- Automotive: Exhaust systems, trim, fasteners, fuel tanks
- Marine: Boat fittings, marine hardware, desalination equipment
CNC Machining Guidelines
Tool Selection
- Tool material: Carbide (YG/YW class) or coated carbide for optimal performance
- Tool geometry: Positive rake angle (5-15°), relief angle (8-12°)
- Nose radius: 0.4-0.8mm for finishing, 0.8-1.2mm for roughing
Recommended Cutting Parameters
| Operation | Cutting Speed (m/min) | Feed Rate (mm/rev) | Depth of Cut (mm) |
|---|---|---|---|
| Rough Turning | 80-120 | 0.2-0.4 | 2-4 |
| Finish Turning | 120-180 | 0.05-0.15 | 0.2-0.5 |
| Milling | 100-150 | 0.1-0.3 | 1-3 |
| Drilling | 60-100 | 0.1-0.2 | N/A |
Coolant & Lubrication
- Coolant type: Emulsion or synthetic coolant with EP additives
- Coolant pressure: ≥5 MPa, directed at cutting zone
- Avoid dry cutting: Always use coolant to prevent work hardening
Surface Finish Options
- No. 1 (Hot rolled annealed): Rough matte finish
- 2B (Cold rolled): Smooth matte finish, most common
- No. 4 (Brushed): Directional satin finish
- No. 8 (Mirror): Highly reflective polished finish
- Bead blasted: Uniform matte texture
- PVD coating: Decorative colors (gold, black, blue, etc.)
Heat Treatment
- Solution annealing: 1010-1120°C, rapid cooling (water or air)
- Stress relieving: 200-300°C for cold worked parts
- Avoid sensitization: Do not hold in 425-870°C range for extended periods
Turn this machining question into a manufacturable part
Need this material or process for your next CNC project?
Send your STEP, STP, IGES, DXF, PDF, material, quantity, surface finish, and tolerance requirements. We will review manufacturability and reply with practical quotation guidance.
